Abstract

Microalgal based biofuels have been reported as an attractive alternative for fossil fuels, since they constitute a renewable energy source that reduces greenhouse gas emissions to the atmosphere. However, producing biofuels from microalgae is still not economically viable. Therefore, the integration of biofuel production with other microalgal applications, such as CO2 capture and nutrient removal from wastewaters, would reduce the microalgal production costs (and the environmental impact of cultures), increasing the economic viability of the whole process. Additionally, producing biofuels from microalgae strongly depends on microalgal strain and culture conditions.This study evaluates the effect of culture conditions, namely light irradiance (36, 60, 120 and 180μEm−2s−1) and light:dark ratio (10:14, 14:10 and 24:0), on microalgal growth, atmospheric CO2 uptake and nutrient (nitrogen and phosphorous) removal from culture medium. Four different microalgal strains, Chlorella vulgaris, Pseudokirchneriella subcapitata, Synechocystis salina and Microcystis aeruginosa, were studied to ascertain the most advantageous regarding the referred applications.This study has shown that higher light irradiance values and light periods resulted in higher specific growth rates and CO2 uptake rates. C. vulgaris presented the highest specific growth rate and CO2 uptake rate: 1.190±0.041d−1 and 0.471±0.047gCO2L−1d−1, respectively. All the strains have shown high nitrogen removal efficiencies, reaching 100% removal percentages in cultures with higher light supply. Phosphorus removal increased with light irradiance and with light:dark ratio. The highest removal efficiency, 67.6±7.1%, was achieved by the microalga C. vulgaris.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.