Abstract
Bio-based nonwoven products are potentially more sustainable with a lower environmental impact than the current generation of petrochemical nonwovens. This work aims to examine the structure and performance of an air-laid sheet composed of defibrated Eucalyptus pulp and polylactic acid (PLA) fibers. In this work, Eucalyptus pulp dry fibers were prepared through two different methodologies, yielding fibers with distinct morphological properties. In an air-laid former, specially conceived for this work, sheets with a grammage of 100 g m−2 were prepared from fiber blends with moisture to aid in the consolidation. The resulting air-laid sheets were characterized by their structural, mechanical, and water sorption properties. The results showed that Eucalyptus fibers with fewer fines and fiber deformations yielded more absorbent sheets. The high fines group gave higher sheet strength. 30% of PLA fiber gave the best combination of strength and absorption capacity and stretch at break. The improvement in bulk, dry and wet strength was possible for air-laid sheets produced from the Eucalyptus/PLA mixture. The results showed that PLA has a strong interaction with the sheet fines, affecting consolidation and performance of the final product.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.