Abstract
Abstract Water vapour and CO 2 transmissions of methyl cellulose (MC)-based edible films with varying amounts of the fatty acids, stearic acid (SA), palmitic acid (PA) and lauric acid (LA) were studied and the results were compared with those obtained for a film without added fatty acid. Water vapour transmission rate (WVTR), water vapour permeance (WVPN) and water vapour permeability (WVP) values of films were determined by measuring the amounts of water vapour transmitted through the film and then adsorbed on anhydrous CaCl 2 as a function of time, using a static method. A recently-developed static method which utilises ascarite to adsorb carbon dioxide transmitted through the film was employed for the determination of carbon dioxide transmission rate (CO 2 TR), carbon dioxide permeance (CO 2 PN) and carbon dioxide permeability (CO 2 P) of films. Among the three fatty acids studied, SA was found to be the most effective in decreasing both the water vapour and the CO 2 transmissions of films. In general, it was observed that WVTR, WVPN and WVP values of films decreased with increasing fatty acid content in the film composition. CO 2 transmission parameters also decreased with increasing SA and PA contents but increased with increasing LA content of films.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.