Abstract
A Ni-rich Ni50.3Ti29.7Hf20 (at. %) high-temperature shape memory alloy was machined under different cooling conditions, specifically cryogenic cooling and flood cooling, and results were compared with those from dry machining. The effects of cooling on machinability measures such as tool wear, cutting forces and surface quality were evaluated for various cutting speeds. Microhardness, phase transformation temperatures and latent heat of transformation corresponding to the machined specimens were determined using hardness and differential scanning calorimetry tests. Cryogenic cooling was found to notably improve the machinability of the Ni-rich NiTiHf alloy by reducing tool wear, cutting force and surface roughness. This study provides clear indication that the machining process alters the phase transformation temperature of the Ni-rich NiTiHf alloy. After the machining process, austenite finish temperature of specimens increased by 5–10% depending on the machining conditions. The smallest amount of latent heat required for transformation (ΔH) was obtained for each of the two specimens: 2.33 J/g (exothermic) for the cryogenically machined specimen and 3.38 J/g (exothermic) for the specimen machined under flood cooling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
