Abstract
Briquettes are an alternative energy derived from biomass. Biomass material can be obtained from plantation waste such as durian peel, agricultural waste such as corn husk and waste from the fisheries sector such as fish bones. Waste of corn husks, durian peel and fish bones have the potential to become biomass material as an alternative energy. The aim of this research is to analyze the effect of variations in composition, pyrolysis temperature and adhesive concentration on the quality of biobriquettes and emissions resulting from the combustion process. The dried waste materials is then pyrolyzed for 4 hours at 350 ℃ and 500 ℃. Proximate testing was carried out to determine the quality of the biobriquettes. The parameters analyzed in this test include moisture content, ash content, volatile matter content, bound carbon content and heating value. The results of the study revealed that the best sample variations were found in briquettes with a composition of 50% durian peel [T1] [c2] : 50% corn husk with a pyrolysis temperature of 350℃ and an adhesive concentration of 7%. The level of CO emissions produced when burning briquettes is 1,700 mg/Nm3 and SO2 is 0.741 mg/Nm3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Jurnal Presipitasi : Media Komunikasi dan Pengembangan Teknik Lingkungan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
