The effect of caster types on global rolling resistance in manual wheelchairs on indoor and outdoor surfaces

Abstract

ABSTRACTAn important aspect of reducing the strain of wheeling is to decrease rolling resistance. Previous laboratory research, using a treadmill, determined that smaller casters significantly increased rolling resistance. The purpose of this study was to determine the effect of caster size on various indoor and outdoor surfaces on global wheelchair rolling resistance. Three caster types with sizes 4 in, 5 in, and 6 in, three indoor surfaces, and three outdoor surfaces were studied. A manual wheelchair was passively pulled along each surface at 1.11 m/s (3.64 ft/s) by a power wheelchair, and the global rolling resistance of the manual wheelchair was measured using a calibrated force transducer. A 3×3 repeated measures analysis of variance (ANOVA) was conducted for both indoor and outdoor environments. The 4-in casters resulted in the highest global rolling resistance on most surfaces. The 5-in casters had the least rolling resistance on most indoor surfaces, and the 6-in casters had the least rolling resistance on most outdoor surfaces. Although 4-in casters are more popular among active wheelchair users, larger casters were shown to have lower rolling resistance on most surfaces. This study may help users select the best caster size depending upon their daily activities and lifestyle.