The determination of zinc using flow injection and continuous flow analysis combined with a polymer inclusion film-coated column: Application to the determination of zinc in alloys and commercial lithium chloride

Abstract

A column coated with a polymer inclusion film (PIF) containing Aliquat 336 as carrier cast on glass beads packed in a glass tube is described for the separation, preconcentration, and determination of zinc(II) in flow injection analysis (FIA) and continuous flow analysis (CFA) systems. In the FIA method, 200 μL of a sample solution containing 2 mol/L lithium chloride is injected into a 2 mol/L lithium chloride stream. This converts zinc(II) ion into its anionic chlorocomplexes which are then extracted into the Aliquat 336-based PIF by anion exchange. The extracted zinc(II) is then back-extracted into a stream of 1 mol/L sodium nitrate solution and determined spectrophotometrically using 4-(2-pyridylazo)resorcinol as the color reagent. The limit of detection (LOD, S/N = 2) was determined as 0.017 mg/L. The usability of the PIF-based FIA method was demonstrated by the determination of zinc in alloys. The PIF-coated column was also employed successfully in the CFA determination of zinc(II) as an impurity in commercial lithium chloride samples. For this, 2 mol/L commercial lithium chloride solution was passed through the column for a predetermined time period followed by stripping in a stream of 1 mol/L sodium nitrate solution.