Abstract
The authors describe a system for continuous monitoring of the air concentration of 133Xe. The instrument consisted of a sodium iodide scintillation detector, a scalar/ratemeter and a data logger. The crystal was mounted inside a lead shield and enclosed in a perspex cylinder. A fan at one end of the cylinder drew room air into a shielded active volume via an inlet aperture designed to generate turbulent flow with no stagnant areas. The instrument was rendered relatively insensitive to external radiation by positioning the energy window over the 31 keV peak in the 133Xe spectrum. The detector sensitivity was approximately 2 s-1 per MBq m-3, with a typical background count rate of 0.12 s-1. The system was therefore capable of detecting a concentration of 0.06 MBq m-3 in a one-minute sampling interval.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
