The DEAP-3600 liquid argon optical model and NEST updates

Abstract

As liquid argon (LAr) detectors are made at progressively larger sizes, accurate models of LAr optical properties become increasingly important for simulating light transport, understanding signals, and developing analyses.The refractive index, group velocity, and Rayleigh scattering length are particularly important for vacuum ultraviolet (VUV) and visible photons in detectors with diameters much greater than one meter.While optical measurements in the VUV are sparse, recent measurements of the group velocity of 128 nm photons in LAr provide valuable constraints on these parameters.These calculations are further complicated by the dependence of optical parameters on thermodynamic properties that might fluctuate or vary throughout the argon volume.This manuscript presents the model used by DEAP-3600, a dark matter direct detection experiment at SNOLAB using a 3.3 tonne LAr scintillation counter.Existing data and thermodynamic models are synthesized to estimate the wavelength-dependent refractive index, group velocity, and Rayleigh scattering length within the detector, and parameters' uncertainties are estimated.This model, along with in situ measurements of LAr scintillation properties, is benchmarked against data collected in DEAP-3600, providing a method for modeling optical properties in large LAr detectors and for propagating their uncertainties through downstream simulations.Updates are also presented of the Noble Element Simulation Technique (NEST) software, widely used to model scintillation and ionization signals in argon- and xenon-based detectors.