The cutting of soil by narrow blades

Abstract

The available models for predicting the forces acting on a narrow soil cutting blade have required separate measurements of the shape of the three-dimensional soil failure pattern ahead of the blade. It is proposed that a three-dimensional model consisting of straight line failure patterns in the soil can be used to predict both the draft forces and the volume of soil disturbed in front of a narrow blade. Limit equilibrium mechanics equations are written for the soil wedges in terms of an unknown angle of the failure zone and the theoretical draft force is minimized with respect to this angle. Force factors are thus found which are of the type to fit Reece's general earthmoving equation, but which vary with the width to depth ratio of the blade as well as with the rake angle of the blade and the friction angle of the soil. In addition the approximate geometry of the three-dimensional failure pattern in the soil is predicted for varying blade shapes and soil strengths. This allows the design of simple tools on the basis of their draft force requirements and their soil cutting efficiency. The draft force predictions and failure geometry calculations are shown to have considerable verification by experimental results.