Abstract
Conductive magnetorheological elastomers (MREs) consisting of carbonyl iron particles (CIPs), polydimethylsiloxane matrix and carbon nanotube (CNT) covered polyurethane sponge (PUS) were developed. The CIPs were linearly orientated within the porous PUS and the magnetic saturation modulus of PUS-reinforced anisotropic MRE was 1.3 MPa when CIPs content was 70 wt%. This MRE presented typical magnetorheological (MR) effects and the shear storage modulus increased from 0.49 MPa to 0.64 MPa after reinforcing the anisotropic MRE with PUS. Owing to the presence of the CNTs on the PUS networks, the final MRE was conductive. The electrical resistance of the MRE increased with increasing tensile strain, ranging from 27.5 kΩ to 30.5 kΩ at various tensile rates (50, 100, 150, 200, 250 and 300 mm/min respectively). As a result, the smart MRE was effective in a flexible, sensitive and reversible strain sensor.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call