The combined effect of refractory coatings containing reactive elements on high temperature oxidation behavior of chromia-forming alloys

Abstract

The high temperature oxidation behaviors of chromia-forming alloys (F17Ti and Fe–30Cr alloys) have been studied at 1273 K under isothermal conditions and at 1223 K under cyclic conditions, in air under the atmospheric pressure. To extend the oxidation lifetime, coatings have been applied onto the alloy surfaces. Al 2O 3 and Cr 2O 3 films doped with Sm 2O 3 or Nd 2O 3 were prepared via the metal-organic chemical vapor deposition technique. Single Cr 2O 3, Al 2O 3, Nd 2O 3 and codeposited Cr 2O 3–Nd 2O 3, Al 2O 3–Nd 2O 3, Al 2O 3–Sm 2O 3 coatings drastically improved the chromia-forming alloy high temperature oxidation behavior, since they decreased the oxidation rate and enhanced the oxide scale adhesion. Results showed that a critical amount of reactive element (Nd or Sm) in chromia or alumina coatings (11–18 at.%) was needed to observe the most effective effect. The fast precipitation of NdCrO 3 or NdTi 21O 38 and the segregation of reactive elements at the chromia grain boundaries slowing down outward cation transport and consequently blocking the chromia grain growth, was supposed to be the main reasons of the beneficial effect ascribed to the reactive elements in chromia scales.