The Coating Effect on Interconnect Materials After >10 Years of Furnace Exposures

Abstract

One of the key components in the SOFC stack is the interconnect which requires versatile material properties for a proper functioning, e.g., high temperature corrosion stability, low ASR degradation and low chromium evaporation. At the same time, a high production capacity needs to be reached in order to fulfil the supply demand required for GW levels. The high production capacity is realized through Alleima AB’s production line with coil-coil physical vapor deposition of coated interconnects for SOFC and SOEC applications [1].More specifically, Sanergy HT 441 is the standard material intended to be used as an SOC interconnect. The substrate is a ferritic stainless steel (ASTM 441) which is coated with thin layers of Ce and Co (<1 µm). The material can be coated on both sides using the same coating or with a different coating. At elevated temperatures the Co coating forms a protective (CoMn)3O4 spinel layer which drastically reduces Cr evaporation while the Ce layer improves the corrosion resistance by reducing the chromia scale growth at the coating/substrate interface and thereby maintaining a low and stable ASR over time.Since long-term stability is a critical property for interconnects, Alleima has over the years gathered data from furnace samples and can thus present results where some samples have been exposed at elevated temperatures during >10 years. The main results include the effect of Ce thickness or choice of substrate on mass gain and subsequent chromia growth. Selected samples with coating elements different than Co have also been investigated. Samples have been further investigated using scanning electron microscopy for cross-sections, x-ray diffraction for characterization of phases and residual stresses as well as glow discharge optical emission spectroscopy for elemental analysis.