Abstract
The biaxial flexural strength of Optimal pressable ceramics and IPS Empress pressable ceramics were tested, compared and the microstructures and compositions explored. The materials evaluated were Optimal shaded (Opcs) and unshaded (Opcus) ceramics and IPS Empress shaded (Ems) and unshaded (Emus) ceramics. Twenty-one disc specimens per material were prepared, heat-treated and tested. The piston on three-ball test ASTM F394-78 (1991) was used to test the specimens in a universal testing machine at a crosshead speed of 0.15 mm/min. Specimens were viewed in a scanning electron microscope and X-ray diffraction used to determine the phases present. Mean strengths (MPa±SD) were: Ems 120.1±20.5, Emus 135.8±16.0, Opcs 139.1±14.3 and Opcus 138.0±11.5. There was no statistically significant difference between Optimal shaded, Optimal unshaded and Empress unshaded strength values ( p>0.05). Empress shaded strength values were significantly lower than the other materials tested ( p<0.05). Weibull analysis provided m values: Ems 6.1, Emus 10.2, Opcs 12.8 and Opcus 13.9 and 1% and 5% probabilities of failure. Secondary electron imaging revealed a dense dispersal of leucite crystals in the glassy matrix of the Optimal ceramics of an average size 5.5±9.7 μm 2 for the Optimal shaded ceramic and 6.6±13.3 μm 2 for the Optimal unshaded ceramic. Leucite crystal agglomerates were evident for the Empress shaded material and a uniform distribution of fine leucite crystals (1.9±1.8 μm 2) for the Empress unshaded ceramic. Crystal and matrix microcracking were present in most of the material microstructures, together with porosity and tabular alumina platelets in the Optimal ceramics. X-ray diffraction revealed the presence of tetragonal leucite and small amounts of cubic leucite. Optimal ceramics and Empress unshaded ceramic provided higher strength and Weibull m values compared with Empress shaded ceramic. Inherent material defects were characterised and cubic leucite was identified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.