The anaerobic exposure time (AET) as a novel process parameter in the anaerobic side-stream reactor (ASSR)-based process for excess sludge minimization

Abstract

Minimization of excess sludge produced by wastewater treatment plants has become a topical theme nowadays. One of the most used approaches to achieve this aim is the anaerobic side-stream reactor (ASSR) process. This is considered affected by the hydraulic retention time (HRT) of the anaerobic reactor, the anaerobic sludge loading rate (ASLR) and the sludge interchange ratio (SIR), although, studies available in the literature did not reflect a clear relationship with the sludge minimization yields.To overcome this, a novel parameter namely anaerobic exposure time (AET) was defined and related to reduction of the observed yield coefficient (Yobs) in a lab-scale plant implementing the ASSR process. Furthermore, the AET was validated by performing a detailed and thorough review of previous literature. Excess sludge production was successfully reduced (10–60 %) with the increase of the AET (7.9–13 h/d), although maintaining the same HRT in the ASSR and a constant sludge interchange ratio (SIR) (100 %). A strong correlation (Pearson = 0.763) was found between the AET, and the Yobs reduction reported in previous studies, also indicating a linear relationship (R2 = 0.92) between these parameters. Contrarily, the correlation between the Yobs with the ASLR and the ASSR-HRT resulted moderate (Pearson = 0.186) or weak (Pearson=−0.346), respectively. Overall, while operating at low AET (< 6 h), maintenance and uncoupling metabolism were found the main sludge reduction mechanisms. Increasing the AET (>8 h) favoured the occurrence of extracellular polymeric substances (EPS) hydrolysis and endogenous decay mechanisms, which improved excess sludge reduction. To conclude, the AET could be considered a reliable parameter to be used for design or control purposes for the ASSR-based process.