The adhesion of modern soft relining materials to acrylic dentures.

Abstract

Silicone-based liners are widespread materials in prosthetic dentistry. Their mechanical properties have to meet several key requirements such as adequate adhesion to denture base polymers in order to provide right function of masticatory system and oral hygiene. The aim of this paper was to evaluate and compare tensile and shear bond strengths values of three modern autopolimeryzed silicone relining materials bonded to acrylic plates. Three silicone-based soft relining materials were investigated in this study (A-Soft Line 30, Bosworth Dentusil and Elite Super Soft). A total of 78 specimens were prepared: 13 of each material (total: 39) for testing tensile bond strength and 13 of each material for testing shear bond strength (total: 39). The obtained data were analyzed statistically. The average tensile bond strength results were 0.86 MPa for Bosworth Dentusil, 1.00 MPa for Elite Super Soft and 1.25 MPa for A-Soft Line 30. The silicone-based relining materials had different average values of shear bond strength: 0.67 MPa Elite Super Soft; 1.32 MPa A-Soft Line 30 and 1.57 MPa Bosworth Dentusil. As the result of the study it can be concluded that all tested materials have acceptable adhesion values to acrylic resin. According to tensile and shear bond strengths tests the best adhesive properties has A-Soft Line 30.