TG comparison between the efficiency of deposited ammonium bromide and ammonium chloride on the flame-retardancy imparted to cotton fabric

Abstract

Abstract This study investigates the effect of ammonium bromide and/or ammonium chloride as nondurable finishes on the flammability of 100% cotton fabric, (woven construction, weighing 144 g m−2). The laundered bone-dried, weighed fabrics were impregnated with suitable concentrations of aqueous ammonium bromide and/or ammonium chloride solutions by means of squeeze rolls and dried at 110°C for 30 min. Afterwards they were cooled in a desiccator, re-weighed with an analytical precision and kept under ordinary conditions before the fulfillment of the vertical flame test. The optimum add-on values to impart flame retardancy expressed in g anhydrous ammonium bromide and ammonium chloride per 100 g fabrics were individually obtained to be about 3.5–3.89 and 17.31–17.99%, respectively. Thermogravimetric analysis (TG/DTG) of pure cotton and the salts treated fabrics were fulfilled and their curves were compared and commented. The results obtained comply with free radical theory, and also proved the superiority ...