Abstract
In this article, a new vertical test method for estimation of thermoset fabric's flammability has been originated. Apart from this development, ammonium chloride as a nondurable finish on the flammability of 100% cotton fabric (woven construction, weighing 160g/m(sup)2) has been, chosen, and investigated. The laundered bone-dried, weighed fabrics were impregnated with suitable concentration of aqueous ammonium chloride solutions by means of squeeze rolls and dried at 110 deg C for 30 minutes. They were then cooled in a desiccator, re-weighed with an analytical precision and kept under ordinary conditions before conducting the vertical flame test. The optimum add-on values to impart flame-retardancy expressed in g anhydrous ammonium chloride per 100g fabrics were about 16.36-17.31%. The results obtained, comply with Free Radical Theory. Finally, we developed the Mohr analytical test method to detect the salt content in different selected fragments of a treated specimen, so that the amount of variability caused by pad squeeze process in different sectors of a chosen sample could be estimated. Language: en
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
