Abstract
A low-temperature sintering is crucial for the fabrication of multilayer piezoceramic actuators through low-cost internal metal electrodes. Herein, Pb(Mg1/3Nb2/3)O3−Pb(In1/2Nb1/2)O3 −PbTiO3 (PMN−PIN−PT) textured ceramics were prepared by a combined use of refined matrix powder and CuO sintering additive. When the matrix powder was refined by planetary ball-milling for 10 h, the sintering temperature of the textured 0.37PMN−0.29PIN−0.34PT ceramics was lowered to 1175 ºC, and a subsequent addition of 1 mol% CuO further lowered it to 950 ºC. The textured 0.37PMN−0.29PIN−0.34PT ceramics with 3 vol% BaTiO3 (BT) template sintered at 950 ºC for 10 h yielded excellent piezoelectric properties, such as a Lotgering factor (LF) of 97%, a unipolar strain of 0.23% at 2 kV/mm, and a Curie temperature (TC) of 231 ºC. These enhanced piezoelectric properties and high TC result from the high texture, transient liquid phase sintering, Cu2+ ion doping, and minimum BT template content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
