Abstract
The specimens fabricated by material extrusion (ME)-type additive manufacturing (AM) have external notches because of their deposition mechanism. During tensile tests, accurate results cannot be obtained because the external notch causes stress concentration and induces fractures outside the gauge length. In this study, using laser cutting, we removed the notch of specimens without damage to the specimens. By removing the notch and stress concentration in specimens, fractures were induced within the gauge length with a 62% probability, whereas the specimens in which the notch and stress concentration were not removed had a 27% probability. Through this evaluation method, the tensile results of the specimens for various polymers can be compared fairly and quantitatively with a small standard deviation in terms of the tensile strength and elongation at break between the specimens.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call