Abstract
ABSTRACT Novel carbon/glass hybrid thermoplastic composite rods have been developed consisting of a PAN-based carbon fiber, an E-glass fiber, and a thermoplastic matrix. Three types of hybrid rods with different carbon/glass ratios were then fabricated. The surface and cross-sectional morphologies of the hybrid rods were observed using a digital microscope. Additionally, the volume fractions of carbon/glass fibers, matrix, and void were determined by specific gravity measurements and thermogravimetric analyzes. The glass fibers in the hybrid rods display a braided structure of the 2/2 twill weave. The braid angle (defined as the orientation angle of the interlacing yarns with respect to the longitudinal axis of the rod) ranged from 22.3° to 35.2°. The various volume fractions were in the ranges of 24.6-46.2% for the carbon fiber, 23.2-39.8% for the glass fiber, 23.4-25.5% for the matrix, and 7.3-10.2% for the voids. The tensile properties and fracture behavior of the hybrid rods under static and fatigue loading were also investigated. For the static tests, the stress applied to the specimen was nearly linearly proportional to the strain until the failure of all-hybrid rods. The tensile modulus, strength, and failure strain of the hybrid rods were measured in the ranges of 65-91GPa, 1.42-1.84 GPa, and 2.1-2.2%, respectively. The tensile modulus and strength increased as the volume fraction of the carbon fiber increased. However, the failure strain decreased as the volume fraction of the carbon fiber increased. For fatigue tests, the maximum applied stress-number of cycles to failure (S-N) curves for all-hybrid rods were obtained from 0.1 of the stress ratio (minimum/maximum stress) and 10 Hz of the loading frequency. The fatigue strength at 107 cycles for all-hybrid rods was less than 30% of ultimate breaking stress. The fatigue performance of the hybrid rods was significantly lower than that of conventional carbon fiber reinforced polymer matrix composites and steel rods. The voids in the hybrid rods affected the fatigue tensile properties.
Highlights
Tendons are widely used as tension members for constructing civil, building, and offshore engineering infrastructure
The results of the tensile tests under static and fatigue loading of the hybrid rods are summarized as follows: (1) The hybrid rods have a braid structure, with braid angles of 22.3° (24K1P), 30.2° (24K2P), and 35.2° (24K3P). (2) Voids are clearly visible in the cross-sectional view of the hybrid rods, with the volume fraction of carbon fiber (VCF), glass fiber (VGF), matrix (VM), and void (VV) of 24.58%, 39.75%, 25.49%, and 10.18% (24K1P); 38.34%, 29.63%, 24.54%, and 7.49% (24K2P); and 46.18%, 23.15%, 23.39%, and 7.28% (24K3P), respectively
(3) The stress applied to the hybrid rod specimens was linearly proportional to the strain until failure, with a tensile modulus of 65 GPa (24K1P), 87 GPa (24K2P), and 91 GPa (24K3P), respectively
Summary
Tendons are widely used as tension members for constructing civil, building, and offshore engineering infrastructure. For the fields of civil and building engineering structures, prestressed concrete is the primary construction material for beams and floors in traffic road bridges and piers (automotive, train), floors in high rise buildings as well as cylindrical walls and spherical shells in tanks [1]. Within the field of offshore engineering, prestressed concrete is the primary construction material used in fixed and floating concrete platforms [2]. Tendons and traditional reinforced concrete used in high-tensile-strength steel wires, bars, and rebars. The application of CFRPs in construction, in post-strengthening and rehabilitation, is well known and highly appreciated in most applications due to its long-term reliability
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
