Abstract
The rate-sensitive properties of ultra-high performance concrete (UHPC) subjected to flexural and direct tensile loads were investigated. Dynamic flexural tests were performed by means of a drop hammer impact machine, whereas a servo-hydraulic system was utilized to conduct direct tension tests. The absorbed energy of the UHPC specimens under flexure increased from 0.74 to 4.49 J as the input energy varied from 6.7 to 67 J. The load-bearing capacity and maximum flexural deformation exhibited identical trends as the input energy increased. The high-speed tensile properties, including strength, ductility, and energy dissipation capacity, improved upon increasing the strain rate up to 100 s-1. A nonuniform distribution of the deformation of UHPC specimens under high-speed tension was observed by identifying the zones of strain localization (near crack), uniform strain (far field), and shear lag (transition zone in between) using digital image correlation. The full-field data of displacement, strain, and strain rates were obtained and quantitatively evaluated. The results indicated that multiple mechanisms were involved in the rate-dependent behavior of the UHPC specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
