Abstract
Double Josephson junction HTS resistive SQUIDs have been fabricated using an on-chip shunt Au resistor across a gap in an YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// loop, providing a low shunt resistance of R/sub s/ /spl sim/26 /spl mu//spl Omega/ at T/spl les/77 K. The dependence of the heterodyne oscillation linewidth of the R-SQUID on the thermal noise across the shunt resistor is under investigation with a view to the development of an absolute noise thermometer. Signal powers /spl sim/nW have been measured and the device has been shown to be tunable from 5 to 50 MHz. The measured oscillation linewidth (/spl sim/30 kHz at 17 K) is believed to be the narrowest reported for such an HTS device, however non-thermal broadening of the linewidth is also observed, as has been reported for single junctions at GHz frequencies. We describe measurements on such devices over a range of temperatures and bias conditions.
Accepted Version
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call