Abstract
Al‐ and B‐doped 3C–SiC ceramics were prepared by hot‐pressing powder compacts containing submicrometer‐sized β‐SiC, precursors of 5 wt% nanosized β‐SiC, and an optional additive (Al or B) in an Ar atmosphere. Electron probe microanalysis (EPMA) investigation on the obtained specimens revealed that a portion of the doped Al and B atoms substituted the zinc blende lattice sites. The temperature‐dependent electrical resistivity data of the Al‐ and B‐doped SiC specimens were measured in the 4–300 K range and compared with those of an undoped specimen. The Al‐ and B‐doped SiC specimens exhibited resistivities that were as high as ~103 Ω cm at room temperature and ~105 and ~104 Ω cm, respectively, below 100 K. These values are larger than those of the undoped SiC specimen by a factor of ~104. Such high resistivities of the impurity‐doped specimens are attributable to the carrier compensation by the Al‐ and B‐derived acceptors located well above the valence‐band edge of 3C–SiC. Photoluminescence investigation revealed that the Al‐ and B‐doped specimens exhibited emission profile below 2 eV, implying the existence of the acceptors.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call