Abstract
IntroductionAn increase in the temperature of the pulp chamber occurs during polymerisation of all types of light-curing resin-containing restorative materials, due to both the exothermic reaction of the material and the energy absorbed during the curing process. Increase in temperature of the pulp chamber of primary teeth during the curing process or the thermal conductivity properties of coloured compomers (CCs) have not yet been investigated in detail. The aim of the present study was to investigate the increase in pulpal temperature in primary teeth during curing of CCs.Materials and MethodsA Class-II cavity was prepared on the extracted primary mandibular second molar. Pulpal microcirculation of the tooth was performed using an experimental mechanism. The study included 15 groups and 10 experiments in each. Seven different CCs: pink, blue, gold, silver, orange, lemon, green, respectively from two different manufacturers (Groups 1–7: Twinky Star; VOCO, Cuxhaven, Germany. Groups 8–14: Nova Rainbow; IMICRYL, Konya, Turkey.) and a tooth-CC (Group 15: Dyract XP; DENTSPLY, Weybridge, UK.) were applied in prepared cavity. In all groups the compomers were light cured for 40 s. Intrapulpal temperature changes (Δt) in 20th and 40th second were recorded. In Group-15 the Δt values in 10th second were also recorded as per the manufacturer’s instructions. The Kruskal–Wallis test and the Mann–Whitney-U test were used for statistical analyses.ResultsAt the end of 40-s irradiation time, the orange, lemon and green colours of Nova Rainbow resulted in significantly lower Δt values than the same colours of Twinky Star (p = 0.0001), and silver, blue, lemon, green, orange, and pink CCs of Nova Rainbow and the blue and silver shades of Twinky Star demonstrated lower Δt values than the reported critical temperature increase (5.5 °C).ConclusionAn increase in the irradiation time consequently led to an increase in the intrapulpal temperature. Therefore, manufacturers should focus on production of new CCs with shorter polimerization time.
Highlights
An increase in the temperature of the pulp chamber occurs during polymerisation of all types of light-curing resin-containing restorative materials, due to both the exothermic reaction of the material and the energy absorbed during the curing process
Enabling children to choose the colour of their own restoration can have a positive effect in overcoming fear of dental procedures and impatience during treatment while creating enthusiasm regarding maintenance of oral health (Hwang et al, 2007; Yan, 2017). Manufacturers such as Voco Twinky Star and Imicryl Nova Rainbow produce coloured compomers (CCs) that are widely used in paediatric dentistry
The present study aimed to investigate the increase in intrapulpal temperature in primary molar teeth, at the 20th and 40th second of light curing process of CCs from two different manufacturers and compare the findings with a tooth-coloured compomer
Summary
An increase in the temperature of the pulp chamber occurs during polymerisation of all types of light-curing resin-containing restorative materials, due to both the exothermic reaction of the material and the energy absorbed during the curing process. Increase in temperature of the pulp chamber of primary teeth during the curing process or the thermal conductivity properties of coloured compomers (CCs) have not yet been investigated in detail. Enabling children to choose the colour of their own restoration can have a positive effect in overcoming fear of dental procedures and impatience during treatment while creating enthusiasm regarding maintenance of oral health (Hwang et al, 2007; Yan, 2017). Manufacturers such as Voco Twinky Star and Imicryl Nova Rainbow produce coloured compomers (CCs) that are widely used in paediatric dentistry. Despite the advantages of CCs, there is a lack of studies on the possible thermal harmful effects of light-curing process of the material on the primary tooth pulp tissue
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
