Abstract
The issues of pollution of fresh water bodies with industrial wastewater containing cadmium ions Cd + 2, lead Pb + 2 and copper Cu + 2 are considered, on the basis of the studies it has been established: the sorption efficiency decreases with an increase in the grain size of briquetted peat; The most efficient process of sorption of ions by briquetted peat proceeds within 5 minutes of contact, then it slows down. Within 5 minutes, up to 91% of Сd + 2 ions, 98% of Pb + 2 ions, 90% of copper ions Cu + 2 are removed, the sorption capacity at saturation was: for Сd + 2 - 0.0778 mMol / g ( 8.75 mg / g), for Pb + 2 - 0.8205 mMol / g (170.00 mg / g), for Cu + 2 - 2.707 mMol / g (172 mg / g). The obtained research results indicate the possibility of using briquetted peat as an effective sorbent for wastewater treatment. On the basis of the research carried out, a technology has been developed for water purification from cadmium, lead, and copper ions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Vestnik of Brest State Technical University Civil Engineering and Architecture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
