Technology Development for Hydrogen Production Using Nuclear Energy

Abstract

Nuclear energy is a low-carbon energy source which can provide both electricity and high-temperature heat. Nuclear-based hydrogen production offers a unique opportunity to mitigate carbon emissions. Canadian Nuclear Laboratories (CNL) has been actively developing technologies for nuclear hydrogen production. This poster will highlight CNL’s capability and achievements on the Cu-Cl thermochemical process (CNL trademarked as HCuTECTM) and Solid oxide electrolysis (SOE).HCuTECTM has four main steps in the process: Electrolysis, Separation, Hydrolysis and Thermolysis. The maximum temperature of the HCuTECTM process is 530 oC, which is lower than other thermochemical processes and makes its coupling with some small modular reactors and the supercritical water nuclear reactor ideal since these reactors can supply heat above 600 oC. CNL has extensively studied these individual steps and demonstrated an integrated laboratory system (shown in Figure 1) with a hydrogen production capacity of 100 g/d. CNL is interested in scaling up the process with industrial partners.SOE is also being researched and advanced for hydrogen and clean fuel production at CNL. Current effort is focused on the materials development for oxygen conducting cells. Several CNL cells were made with in-house materials and tested on single cell stations. Preliminary results of CNL cells showed very promising performance for hydrogen production. In the meantime, CNL is assessing the economic benefit of different options to integrate SOE with high-temperature nuclear reactors for both hydrogen and clean fuel production. Figure 1