Abstract

PurposeTo image the abdomen of a patient with a gantry mounted imaging system of a linear accelerator, different cone beam computed tomography (CBCT) protocols are available. The whole‐body dose of a full rotation abdomen CBCT and a half rotation CBCT was compared. In our clinic, both CBCT protocols are used in daily routine work.MethodsWith an adult anthropomorphic Alderson phantom, the whole‐body dose per CBCT scan was measured with thermoluminescence dosimeters. The half rotation CBCT was applied such that the gantry mounted X‐ray source rotated around the right side of the phantom. The 183 measurement locations covered all ICRP recommended critical organs (except the gonads). The effective dose was calculated with the mean organ dose and the corresponding tissue weighting factors. A point‐by‐point dose comparison of both protocols was conducted.ResultsThe effective dose was 5.4 mSv ±5% and 5.0 mSv ±5% (estimated type B 1σ) for the full and the half rotation CBCT respectively. There was no significant difference (α = 0.05) in the effective dose within the precision of the measurement (1σ = 5%). The half rotation CBCT displayed an inhomogeneous dose distribution in a transversal phantom slice in contrast with the full rotation CBCT. In the imaging region, the mean dose was (20.5 ± 3.4) mGy and (19.2 ± 7.4) mGy (measured type A 1σ) for the full and the half rotation CBCT respectively.ConclusionThe half compared to the full rotation CBCT displays a smaller field‐of‐view in a transversal slice and no significant difference in the effective dose. Hence, the full rotation CBCT is favorable compared to the half rotation CBCT. However, by using the half rotation protocol, critical volumes in the patient can be spared compared to the full rotation protocol.

Highlights

  • Cone beam computed tomography (CBCT) is widely used in clinics for patient positioning in a radiation treatment session

  • The TrueBeam linear accelerator (Varian Medical Systems, Palo Alto, CA, USA) is equipped with a gantry mounted on-board imager (OBI) capable of performing CBCT scans

  • The effective dose (ED) was determined to 5.4 mSv Æ5% and 5.0 mSv Æ5% for the full and the half rotation CBCT respectively

Read more

Summary

Introduction

Cone beam computed tomography (CBCT) is widely used in clinics for patient positioning in a radiation treatment session. The quantification of CBCT dose is an important issue. The pelvis or the pelvis spotlight protocol is available. The CBCT is acquired with a full rotation of the X-ray source around the patient. The pelvis spotlight protocol uses a half rotation of the X-ray source around the patient. The weighted CT dose index (CTDIw) given by Varian, is 1/3 lower for the half compared to the full rotation CBCT. The spotlight protocol is used more frequently because of the potential dose reduction compared to the full rotation protocol. The resulting spotlight CBCT has a smaller field-ofview in a transversal slice compared to the full rotation protocol

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call