Tailoring porous organic polymers with enhanced capacity, thermal stability and surface area for perfluorooctane sulfonic acid (PFOS) elimination from water environment

Abstract

Perfluorooctane sulfonic acid (PFOS), a perfluoroalkyl substance, has engendered alarm over its presence in water sources due to its intrinsic toxicity. Hence, there is a pressing need to identify efficacious adsorbents capable of removing PFAS derivatives from water. To achieve this, batch adsorption studies under various circumstances were employed to tune amorphous polymer networks regarding their morphological configuration, heat durability, surface area and capacity to adsorb PFOS in water. A facile, one-pot nucleophilic substitution reaction was employed to synthesize amorphous polymer networks using triazine derivatives as building units for monomers. Notably, POP-3 exhibited a superlative adsorption capacity, with a removal efficiency of 97.8%, compared to 90.3% for POP-7. POP-7 exhibited a higher specific surface area (SBET) of 232 m2 g−1 compared to POP-3 with a surface area of 5.2 m2 g−1. Additionally, the study emphasizes the importance of electrostatic forces in PFOS adsorption, with pH being a significant element, as seen by changes in the PFOS sorption process by both polymeric networks under neutral, basic and acidic environments. The optimal pH value for the PFOS removal process using both polymers was found to be 4. Also, POP-7 exhibited a better thermal stability performance (300 °C) compared to POP-3 (190 °C). Finally, these findings indicate the ease with which amorphous polymeric frameworks may be synthesized as robust and effective adsorbents for the elimination of PFOS from waterbodies.