Abstract
AbstractWe report a correlation outcome for mechanical and gamma-ray transmission properties of tellurite glasses by increasing tungsten(vi) oxide concentration in glass structure. The mechanical properties as well as Poisson’s ratio (σ) of the studied glasses are estimated by applying Makishima–Mackenzie model. Gamma-ray attenuation properties using various fundamental parameters are determined in 0.015–15 MeV energy range. Poisson’s ratio (σ) decreased from 0.43017 to 0.42711, while all elastic moduli increased linearly with the molar increment of either [WO3] or [TeO2] in the molecular structure of the glass network. Moreover, gamma-ray attenuation properties are enhanced as a function of increasing WO3substitution amount from 30 to 50% mol in the glass structure. Half-value layer values at 15 MeV are found to be between 2.648 and 2.8614 cm. I4 samples with a composition of 20TeO2–50WO3–30GdF3and density of 6.0530 g/cm3was found to have superior material properties in terms of elastic and gamma-ray attenuation properties. It can be concluded that maximized WO3contribution into the tellurite glasses may be considered as a critical tool in terms of establishing a symmetry between mechanical and gamma-ray attenuation properties for high-density tellurite glasses for their potential utilization in nuclear waste management, radiation shielding, and radioactive source transportation purposes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.