Abstract
The use of magnesia sources with high specific surface area and small particle size in the Al2O3–MgO system can induce faster in situ spinel (MgAl2O4) formation in castable compositions, improving the slag corrosion resistance. However, the higher reactivity of these raw materials lead to an intensive brucite formation (followed by volumetric expansion), spoiling the castable's properties during the curing and drying steps. Considering these aspects, a systemic analysis of three magnesia sources (dead-burnt and caustic ones) was carried out in order to evaluate: (1) their hydration impact on the refractory castables properties, and (2) their bonding ability in cement-free compositions. Mechanical strength, thermogravimetric and Young's modulus tests were conducted during the castables’ curing and drying steps. According to the results, the elastic modulus measurement is an efficient tool to evaluate the magnesia hydration. The addition of proper amounts of calcium aluminate cement and/or silica fume to the castables can inhibit the crack formation and provide suitable mechanical properties. The results also show that under certain conditions, MgO can be used as a binder, replacing calcium aluminate cement and leading to a significant reduction in the castables costs with no drawbacks to their refractoriness.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
