Abstract
Incremental sheet metal forming is a highly versatile die-less forming process for manufacturing complex sheet metal components. Robot-assisted incremental sheet forming, or roboforming, allows a wider range of tool motion, providing the capability to shape intricate components. This makes roboforming the most flexible variant of the incremental forming method. However, the serial arrangement of links and joints in a robotic manipulator results in low positional accuracy under forming loads due to insufficient structural stiffness. The stiffness of the machine frame and tool directly impacts the accuracy of the final formed profile. The impact of machine compliance on component shape in incremental sheet forming is substantial in roboforming. This work presents a methodology for systematic analysis of the factors contributing to the errors in the geometric shape of robot-based forming. Experimental and numerical methods are used to estimate the material springback, tool/tool holder deflections, and errors due to machine compliance. The CNC machine frame is relatively stiffer than the industrial robots, such that material springback is estimated based on the experimental trials on CNC for cone and variable wall angle cone profiles. Tool and tool holder deflections are estimated using finite element simulations. The analytical method using the Virtual Joint Model is used to model the joint stiffness, and consequently, the robot Cartesian stiffness is estimated to predict path deviation contributing to geometric shape errors. The proportional contribution of each factor in the overall deviation in the Roboforming is also quantified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.