Abstract
Within Release 6 of the 3GPP standards, one of the most important features is High Speed Uplink Packet Access (HSUPA) or enhanced DCH (E-DCH), which is the uplink counterpart for High Speed Downlink Packet Access (HSDPA). Most notable improvements, when compared to the R99 specification, are the achievable peak data rate of 5.76 Mbps, reduced latency due to a shortened transmission time interval and increased uplink cell throughput. This has been achieved by the use of multi-code transmission on the uplink, together with an improved forward error correction scheme including the use of hybrid automatic repeat request operating between the UE and the nodeB and a tighter (nodeB based) control of the uplink resources. In this paper, system level design considerations are derived which point out the design problems one faces when designing a HSUPA compliant UE. First, the HSUPA system is explained, then the receiver is analysed in more detail and finally, considerations for the RF transmitter block are shown.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call