Synthesis of suspension stabilizers for isolation fluids by response surface methodology and study of their properties

Abstract

In order to solve the problem of unstable settling of isolation fluid at high temperatures, high-temperature-resistant suspension stabilizers for isolation fluids were prepared. Using the free radical aqueous solution method with 2-acrylamido-2-methylpropanesulfonic acid (AMPS), YX-1 (a monomer containing an amide group) as the main chain of the molecule, and N-Vinylpyrrolidone (NVP) and DX-2 (monomer containing hydrophobic groups) as the side chains of the molecule. We innovate the suspension stabilizer synthesis process, the synthesis conditions of the suspension stabilizer were optimized by using the one-factor experimental design and response surface analysis. The elemental composition and structure of the polymer suspension stabilizers were tested and analyzed by using X-ray spectroscopy (XPS), infrared spectroscopy (FTIR) and nuclear magnetic resonance hydrogen spectroscopy (H NMR). The hydrophobic aggregation behaviour of the polymer molecular chains was demonstrated from a microscopic point of view using fluorescence spectroscopy tests and size analysis of polymer molecular aggregates. Oscillation experiments on the isolation solution with suspension stabiliser showed that the hydrophobic groups contained in the polymers can undergo the effect of joining and bridging, and can also form a strong spatial network structure at 220°C, leading to the enhanced elasticity of the isolation fluid, which helps to alleviate the sedimentation of barite. Sedimentation stability and compatibility were evaluated for the isolation fluid containing suspension stabilizers. It was found that the isolation solution suspension performance is good under the condition of 90–220℃, its density difference is less than 0.10 g/cm3. It can also effectively prevent the contact contamination of the drilling fluid cement slurry, which is conducive to the improvement of the quality of the deep well cementing.