Abstract
AbstractA new preparation process for silicon carbide (SiC) powder is developed. In the Si–(C) –PTFE–Ar system, the grain size and morphology of the product 3C–SiC were controlled by adding a carbon source (graphite) and changing the percentage of polytetrafluoroethylene (PTFE) (0%, 10%, and 20%). The experimental results showed that the SiC powders prepared using a molar ratio of 1:1 silicon powder to graphite, plus 20% PTFE have a uniform particle size distribution (∼130 nm), a lamellar structure made of spherical particle stacking, a small bandgap (1.80 eV), a high carrier concentration, and a large number of lattice defects. These properties are expected to increase the electrical conductivity of 3C–SiC and decrease its thermal conductivity, thus providing a promising feedstock preparation option for SiC thermoelectric materials. In addition, the mechanism of PTFE in the preparation of SiC reactions was studied in detail.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call