Synthesis of MgO micro-rods coated with charred dextrose and its application for the adsorption of selected heavy metals from synthetic and real groundwater.

Abstract

MgO micro-rods supported on porous carbon were synthesized by an economical method and applied for the adsorption of three different heavy metals ions (As (III), Cd (II) and Pb (II)). Here, we used dextrose as the source of carbon during the synthesis. The synthesized material has been characterized by different techniques like XRD, TEM, FE-SEM, BET and FT-IR for the determination of various physical properties. Compared with MgO synthesized without dextrose, the carbon-supported MgO or C-MgO demonstrated consistent rod-shaped morphology, higher surface area and better absorptivity. The adsorption data were analysed using various isotherm models and the Freundlich isotherm model seemed to provide the best fit to the data. The adsorption kinetics data on the other hand was well explicated by the pseudo second-order kinetic model. The maximum adsorption capacity of C-MgO was 508.47mgg-1 for As (III), 566.01mgg-1 for Cd (II) and 476.19mgg-1 for Pb (II), respectively after 6h of reaction. To check the real-life usability and efficiency of C-MgO, it was added to a groundwater sample which had 169.55ppb of As (III) and within 20min it was adsorbed with 99% efficiency. Reusability studies reveal that C-MgO could be used up to 6 times with more than 60% efficiency. This study shows that C-MgO has high adsorptive ability, is an economic and non-toxic material with versatile applications and can be used for groundwater remediation in real life.