Synthesis, characterization and catalytic activity of partially substituted La1−xBaxCoO3 (x ≥ 0.1 ≤ 0.4) nano catalysts for potential soot oxidation in diesel particulate filters in diesel engines

Abstract

AbstractThe sol gel method was used in preparing a series of A site partially substituted La1−xBaxCoO3 (x ≥ 0.1 ≤ 0.4) perovskite catalysts coded LBC1, 2, 3, and 4 and their potential as catalysts for soot oxidation were evaluated. The Brunauer–Emmett–Teller (BET), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES), Thermogravimetric/Differential Thermal Analysis (TGA/DTG), X-ray analysis (XRD) were used in characterizing the prepared perovskite catalyst. The result shows that at (x≥ 0.2 ≤ 0.4), there was an increase in surface area when we compare it with that of x = 0. The increase in surface area helps in increasing the catalytic performance of the catalyst. Also, when evaluating the catalytic performance of the synthesized catalysts, it was observed that doping the perovskite catalysts helped in the general improvement of the catalytic performance for soot oxidation. The best performance in this research study with a T50 of 484 °C was observed at x = 0.2 catalyst (LBC2). This shows that the non-noble perovskite catalysts prepared in this research study has the potential to replace the noble metal based catalysts used presently in the diesel automotive industry.