Abstract
ABSTRACTA series of materials of the composition Ba0.7Sr0.3ZrxTi(1 − x)O3 (BSZT), where x = 0.00, 0.01, 0.02 and 0.03, were synthesised through the sol–gel method whereupon the manifestations of partial substitution of Ti4+ by Zr4+ on the structural and dielectric behaviour of Ba0.7Sr0.3TiO3 (BST) were studied. X-ray diffraction patterns of all samples showed the development of a single-phase crystalline perovskite structure. The dielectric behaviour of the ceramic samples has been studied in detail in the frequency range 10 Hz to 1 MHz at room temperature, and as a function of increase in temperature. The sample with 2% Zr recorded the highest dielectric constant. The dielectric loss values for all the BSZT compositions are remarkably low, tan δ = 0.021∼0.026 at 1 MHz, in contrast to the literature reports. It is observed that small amount of Zr doping on BST, where 0 < x ≤ 0.03 results in the enhancement of dielectric constant while decreasing the bulk density and dielectric loss.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.