Abstract

An asymmetrical aromatic diamine, 1-(4'-aminophenoxy)-4-(4'-aminophenylenesulfanyl) benzene (OSDA) was synthesized. A series of polythioetherimides (PTEIs) were prepared from a thioether-bridged aromatic dianhydride 4,4'-[ p-thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA) and various aromatic diamines having ether or thioether linkages between phenylene rings by a two-step polycondensation procedure via their soluble poly(amic acid) (PAA) precursors. Medium to high molecular weight PAAs were obtained with inherent viscosities near or higher than 1.0 dL g-1, which is high enough to afford flexible and tough PTEI films except for PI-2 (3SDEA-134APB) and PI-6 (3SDEA- m2SPDA) derived from meta-ether-substituted diamines. PI-2 and PI-6 showed some extent of crystallinity compared to the amorphous natures of the other polymers. The PTEI films exhibit good resistance to organic solvents except for PI-3 (3SDEA-133APB), which is soluble in N-methyl-2-pyrrolidinone (NMP) and sulfuric acid at room temperature. The PTEI films show good thermal stability with the 5% weight loss temperatures being above 480°C both in nitrogen and in air. The glass transition temperatures of the PTEIs are in the range of 155—191°C, which are lower than those of the commercial polyetherimides due to their plural thioether linkages in the main chains.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.