Abstract
A nanocrystalline-Zn-embedded TiOx–amorphous carbon composite was prepared using a two-step high-energy mechanical milling (HEMM) process. First, the starting ZnO was reduced to Zn by Ti incorporation via HEMM. The resulting Zn–TiOx composite was then placed in an amorphous carbon matrix via a second milling step, resulting in a Zn–TiOx–C nanocomposite. The samples were analyzed by X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy; the results confirmed the formation of metallic Zn and amorphous TiOx phases in the composite. The nanocrystalline-Zn-embedded phase and its distribution were observed by high-resolution transmission electron microscopy. The electrochemical reaction mechanism of the Zn–TiOx–C nanocomposite with Li+ during the first cycle was investigated by ex situ XRD analysis. The results demonstrated the reaction sequence of the nanocrystalline Zn phase with Li+ and the electrochemical reactivities of the amorphous TiOx and carbon phases toward Li+. In the electrochemical tests, the Zn–TiOx–C composite showed greatly improved electrochemical properties compared to those of pure Zn. This improvement was attributed to the microstructure of the composite, in which the nanocrystalline Zn was uniformly dispersed, to the TiOx phases, and to the amorphous carbon matrix functioning as buffers against the large volume changes of Zn.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call