Abstract

Stable emulsions can have numerous negative impacts on both the oil industry and the environment. This study focuses on the synthesis of two ionic liquids (via. PPBD and PPBH) with four hydrophobic branches and four ionic centers that can effectively treat oil-water emulsions at a low temperature of 40 °C. Their chemical structure was explored using Fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance hydrogen spectra (1H NMR). The effect of temperature, PPBD and PPBH concentration, oil-water ratio, salinity and pH value on the demulsification efficiency (DE) of W/O emulsion was studied detailly and several commercial demulsifiers were also used for comparison. Results revealed that by adding 250 mg/L of PPBH in an E30 emulsion and leaving it for 120 min at 40 °C, the DE could reach 96.34%. Meanwhile, in an E30 emulsion (oil-water mass ratio of 3:7) with 250 mg/L of PPBD, the DE of 95.23% could be obtained at 40 °C for 360 min. Especially, the DE of PPBH could reach 100% in an E70 emulsion (oil-water mass ratio of 7:3) at the same conditions. Additionally, the demulsifier (PPBH) exhibited excellent salt resistance and outperformed some commonly used commercial demulsifiers. Several methods were utilized to investigate the potential demulsification mechanism, including measuring interfacial tension (IFT), three-phase contact angle (CA), droplet contact time, zeta potential, and observing samples under optical microscopy.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call