Synthesis and characterization of new aromatic copoly(ether amide)s bearing 4-trifluoromethylphenyl-2,6-diphenylpyridyl moieties in the main chain

Abstract

A series of new aromatic fluorinated copoly(ether amide)s containing 4-(4-trifluoromethylphenyl)-2,6-diphenylpyridyl moiety with high molecular weight were prepared by a low-temperature solution polycondensation of terephthaloyl chloride with 4-(4-trifluoromethylphenyl)-2,6-bis(4-aminophenyl)pyridine and 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene with various mole ratios of the two monomers ranged from 20/80 to 80/20. All polymers were amorphous and soluble in common organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide and tetrahydrofuran at room temperature or upon heating at 70oC, and could be solution cast into transparent, tough, and flexible films with tensile strengths of 66.9–80.2 MPa, tensile moduli of 1.84–2.03 GPa, and elongations at break of 11.8–20.7%. These new polyamides displayed good thermal stability with gradually increasing of glass temperatures of 259–285oC as an increase of the 4-(4-trifluoromethylphenyl)-2,6-diphenylpyridyl component, the temperature at 10% weight loss of 476–505oC, and the residue of 55–61% at 750oC in nitrogen. They also exhibited low dielectric constants of 3.11–3.38 (1 MHz), low moisture absorption in the range of 1.43–1.75%, and high transparency with an UV–vis absorption cut-off wavelength in the 350–368 nm range.