Abstract
Magnesium oxide (MgO) nanostructures were synthesized by microwave-assisted thermal oxidation at various amount of activated carbon additive. The MgO nanostructures were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffractrometry (XRD) and UV-Visible spectroscopy, respectivly. It was observed that, the obtained MgO have nanocube shape. The MgO nanostructures were applied as a blocking layer in ZnO dye-sensitized solar cells (DSSC). The photovoltage, photocurrent, and power conversion efficiency characteristics of DSSCs were measured under illumination of simulated sunlight obtained from a solar simulator with the radiant power of 100 mW/cm2. The DSSCs with MgO layer exhibited higher current density, open circuit voltage and photoconversion efficiency than those without MgO layer The optimum power conversion efficiency (PCE) was 2.49 % with short circuit current (Jsc) of 6.61 mA/cm2, the open circuit voltage (Voc) of 0.66 V and the fill factor (FF) of 0.59, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
