Synthesis and Characterization of Low Molecular Weight Polylactic Acid

Abstract

The polymerization of (D, L)-lactic acid in the absence of catalysts was studied. Azeotropic distillation using xylene, gave poly(lactic acid) with very low molecular weight, which however, was further increased by post-curing in an air oven. Moreover degradation phenomena and residual xylene were observed, with this procedure. Polycondensation of lactic acid at temperatures up to 180 C under vacuum, resulted in fast reaction with poor control and the products are still characterized by low molecular weight. When the reaction was run at 220 C in inert atmosphere, amorphous poly(lactic acid) was obtained with molecular weight exceeding 3000. The product was found pure, since it is free from solvents, catalysts and monomer. Also, no evidence of thermal degradation was observed. The above characteristics are well acceptable design aspects for biomedical uses.