Synthesis and characterization of FMWCNTs/ZnO doped PVDF nanocomposites for enhanced mechanical, dielectric, and radiation shielding properties

Abstract

This study investigates the enhancement of radiation shielding properties of polyvinylidene fluoride (PVDF) through the incorporation of functionalized multi-walled carbon nanotubes (FMWCNTs) and zinc oxide nanoparticles (ZnONPs), aiming to develop a lightweight, effective, and environmentally friendly shielding material. PVDF-based nanocomposites with varying concentrations of FMWCNTs@ZnO (0.0, 0.5, 1.0, 1.5, and 3.0 wt%) were synthesized using a solution casting method. Morphological analysis via high-resolution transmission electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM) confirmed the uniform dispersion of FMWCNTs@ZnO within the PVDF matrix. X-ray diffraction (XRD) studies revealed an increase in the β-phase crystallinity of PVDF at 1 wt% FMWCNTs@ZnO concentration, with a notable peak shift indicating enhanced polar group development. Vickers microhardness tests showed a significant improvement, with hardness values increasing from 342.5 kg/mm2 for pure PVDF to 391.2 kg/mm2 for nanocomposites containing 3 % FMWCNTs@ZnO. Dielectric analyses demonstrated increased permittivity and a dynamic relaxation behavior indicative of improved charge carrier density and interfacial polarization. Gamma shielding efficiency, assessed through linear attenuation coefficients (GLAC) and mass attenuation coefficients (GMAC), exhibited superior performance at lower photon energies (80 keV), with the highest GLAC and GMAC values observed for the 3 wt% FMWCNTs@ZnO doped samples. These findings underscore the potential of FMWCNTs@ZnO doped PVDF nanocomposites as promising materials for radiation shielding applications, offering a synergistic approach to enhancing mechanical, dielectric, and protective properties against ionizing radiation.