Synergies of surface-interface multiple active sites over Al-Zr oxide solid solution supported nickel catalysts for enhancing the hydrodeoxygenation of anisole

Abstract

Currently, the catalytic hydrodeoxygenation (HDO) of oxygen-containing compounds derived from biomass to highly valuable chemicals or hydrocarbon bio-fuels is attracting more and more attention. Concerning the design and synthesis of high-performance supported metal catalysts for HDO, the efficient deposition/immobilization of active metal species on supports, as well as the construction of the favorable properties of supports, is quite necessary. In this work, we fabricated series of aluminum-zirconium oxide solid solution supported Ni-based catalysts by a simple surfactant-assisted homogeneous coprecipitation and applied them in the HDO of anisole. Various structural characterizations showed that surface-interface properties of Ni-based catalysts (i.e., surface acidity, defective structures, and metal-support interactions) could be finely tuned by adjusting the amount of Al introduced into Al-Zr oxide solid solutions, thus profoundly governing their catalytic HDO activities. It was demonstrated that the introduction of an appropriate amount of Al could not only enhance surface acidity and promote the formation of defective Zr-Ov-Al structures (Ov: oxygen vacancy) but also facilitate the generation of interfacial Niδ+ species bound to the support. Over the Ni-based catalyst bearing an Al2O3:ZrO2 mass ratio of 5:2, a high cyclohexane yield of ∼77.4% was attained at 230 °C and 1.0 MPa initial hydrogen pressure. The high catalytic HDO efficiency was revealed to be correlated with the catalytic synergy between Ni0 and adjacent interfacial Niδ+ species, together with the promotion of neighboring defective oxygen vacancies and acidic sites, which contributed to the enhanced activation of the methoxy group in anisole and reaction intermediate and thus greatly improved HDO activity. The present findings offer a new and promising guidance for constructing high-performance metal-based catalysts via a rational surface-interface engineering.