Synchronous identification of nonlinear structural parameters and unknown external excitation based on improved UKF

Abstract

The traditional Unscented Kalman Filter (UKF) approach for nonlinear structural identification usually requires knowledge of external excitation. However, in real application, obtaining the input excitation of nonlinear structures can be challenging due to measurement error or difficulty in acquiring the accurate information. Consequently, the real-time application of the UKF method will be constrained. To address this issue, this paper develops an improved UKF-based synchronous identification method of nonlinear structural parameters and unknown external excitation. The proposed method starts with a preliminary estimate of the unknown excitation using the current predicted values of structural dynamic responses and parameters. Subsequently, the external excitation is further identified based on the updated state vector. In addition, to reduce the effect of measurement noise on the nonlinear structural identification and ensure the accuracy of the identified results, a Kalman Filter (KF) process is embedded in the UKF to optimize measurement noise covariance matrix in real time. The practicability and accuracy of the improved UKF method are confirmed by conducting numerical simulations on a single degree-of-freedom (S-DOF) and a six degree-of-freedom (six-DOF) nonlinear structural systems due to unknown seismic excitation. Moreover, a shake table test of a five-storey steel frame subjected to seismic excitation is employed to attest the feasibility of the proposed method. Both numerical and experimental results demonstrate that the improved UKF method can effectively achieve synchronous identification for nonlinear structural parameters and unknown excitation.