Sustainable strategy for lignin etherification and its promotion of anti-UV aging PLA biocomposite

Abstract

Achieving efficient modification of both phenolic (Phe)-OH and aliphatic (Aliph)-OH groups in lignin simultaneously via sustainable method, remained a significant challenge. In this study, a series of highly hydroxyl-substituted alkali lignin phenyl propylene ketone ethers (ALK) were obtained under 50 °C without any by-products via the mild and sustainable hydroxyl-yne click reaction method. Notably, phenolic (Phe)-OH content of lignin decreased from 4.12 mmol g−1 to 0.07 mmol g−1 with a conversion rate of 98 %, while the aliphatic (Aliph)-OH content of lignin decreased from 2.57 mmol g−1 to 0.10 mmol g−1 with a conversion rate of 96 %. Owing to the efficient etherification, ALK showed excellent organic solvent (such as trichloromethane, DCM, THF, and acetone) solubility, which thereby improving the interfacial compatibility between ALK and PLA matrix. 3 wt% ALK obviously enhanced the mechanical properties of ALK/PLA biocomposite films, with the yield strength, breaking strength, and Young’s modulus improving by 114.2 %, 30.7 % and 250.2 %, respectively. Additionally, due to the newly introduced vinyl ether bonds (−C–O–CC–) in ALK by hydroxyl-yne click reaction, only 1 % ALK could endow ALK/PLA biocomposite with excellent UV shielding (100 %), high transmittance (84.3 %) and Anti-UV aging property. The yield strength and Young’s modulus represented an increase of 209 % and 86 %, respectively, even after 3 h of UV-irradiation. This study presents an environmentally friendly lignin functionalization method that unleashes the inherent Anti-UV aging properties of lignin, opening new avenues for the development of high-performance lignin-based composites.