Surface reaction layer formation in vitro on a bioactive glass fiber/polymeric composite

Abstract

In order to provide a fixation vehicle between a polymeric composite femoral hip prosthesis and bone tissue, we fabricated bioactive glass fibers. The glass fibers had a tensile strength of 596 MPa, 14 times that of bulk bioactive glass. After immersion in protein-free simulated body fluid for 10 days, we observed the development of a calcium phosphate layer (specifically, partially crystallized, calcium-deficient carbonated hydroxyapatite) on the surface of the glass fibers. The stages of the surface reaction layer formation were similar to those of 45S5 bioactive glass although the kinetics of the reaction layer formation were slower. We combined the bioactive glass fibers with a polymeric matrix to form a fiber-reinforced composite material and observed the formation of a calcium phosphate layer on the surface of the glass fibers within the composite material after immersion in both protein-free and protein-containing simulated body fluids. The rate of reaction layer formation was reduced in the presence of proteins. In both protein-free and protein-containing solutions, a “halo” of bioactivity reactions was observed on the surface of the polymer in regions surrounding the glass fibers. Our results suggest these glass fibers and glass fiber composites will exhibit bioactivity reactions in vivo. © 1997 John Wiley & Sons, Inc. J Biomed Mater Res, 37, 440–448, 1997.