Abstract

In nanofluidics, surface control is a critical technology because nanospaces are surface-governed spaces as a consequence of their extremely high surface-to-volume ratio. Various surface patterning methods have been developed, including patterning on an open substrate and patterning using a liquid modifier in microchannels. However, the surface patterning of a closed nanochannel is difficult. In addition, the surface evaluation of closed nanochannels is difficult because of a lack of appropriate experimental tools. In this study, we verified the surface patterning of a closed nanochannel by vacuum ultraviolet (VUV) light and evaluated the surface using streaming-current measurements. First, the C18 modification of closed nanochannels was confirmed by Laplace pressure measurements. In addition, no streaming-current signal was detected for the C18-modified surface, confirming the successful modification of the nanochannel surface with C18 groups. The C18 groups were subsequently decomposed by VUV light, and the nanochannel surface became hydrophilic because of the presence of silanol groups. In streaming-current measurements, the current signals increased in amplitude with increasing VUV light irradiation time, indicating the decomposition of the C18 groups on the closed nanochannel surfaces. Finally, hydrophilic/hydrophobic patterning by VUV light was performed in a nanochannel. Capillary filling experiments confirmed the presence of a hydrophilic/hydrophobic interface. Therefore, VUV patterning in a closed nanochannel was demonstrated, and the surface of a closed nanochannel was successfully evaluated using streaming-current measurements.

Highlights

  • Recent progress in the miniaturization of fluidic devices has led to the downsizing of microfluidics to nanofluidics

  • The C18 groups were subsequently decomposed by vacuum ultraviolet (VUV) light, and the surface became hydrophilic in nature because of the formation of silanol groups

  • Streaming-current measurements showed that the current signals increased in intensity with increasing VUV light irradiation time, indicating the decomposition of the C18 groups on closed nanochannel surfaces

Read more

Summary

Introduction

Recent progress in the miniaturization of fluidic devices has led to the downsizing of microfluidics to nanofluidics. A nanochannel has a typical diameter of 10–1000 nm and a volume on the femtoliter to picoliter scale. Such ultrasmall channels have led to the development of various new functional devices [1,2,3,4,5]. The basic technologies used to develop these functional devices include fabrication, flow control, and detection. The surface-to-volume (S/V) ratio in a typical nanospace is extremely high, which means that molecules/ions on nanochannel surfaces strongly affect the behavior of the liquid phase. The high S/V ratio contributes to liquid motion in nanochannels.

Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call